NETWORK CONFIGURATION
If the computer running the Domino server has more than one NIC running the same protocol stack, you must define a different NetBIOS LANA number for each Notes network port for NetBIOS.
NetBIOS systems using the same transport protocol should be in the same Notes named network. If you create Connection documents on the server, the LAN port you select must also be for the same transport protocol.
To define a LANA number in Lotus Domino
1. From the Domino Administrator or Web Administrator, click the server for which you want to define a LANA number.
2. Click the Configuration tab.
3. Do one of these:
5. Click "Portname Options," and choose Manual.
6. Enter the correct LANA number.
7. Click OK.
To find the LANA number for a NetBIOS protocol on a Windows XP or 2000 system
A Microsoft® Windows® XP or 2000 system does not have a direct means to see the LANA associations. For Windows XP or 2000 systems you can either review the system's registry bindings or use a Microsoft tool called LANACFG to see and change the LANA number assignments.
The following is an example of the tool's output from a Windows 2000 server.
lanacfg [options]
setlananumber - Change the lana number of a bind path
rewritelanainfo - Verify and write out lana info to the registry
showlanadiag - Show lana diagnostic info
-->NetBEUI Protocol-->3Com EtherLink III ISA (3C509/3C509b) in Legacy mode
Lana: 7
-->NetBEUI Protocol-->WAN Miniport (NetBEUI, Dial Out)
Lana: 3
-->NWLink NetBIOS
Lana: 0
-->WINS Client(TCP/IP) Protocol-->Internet Protocol (TCP/IP)-->3Com EtherLink III ISA (3C509/3C509b) in Legacy mode